FAQ

Stripping

Stripping

  • Product Ejection Rubber Too Close To Product/ Scrap Cutting Rule
    Place Product Ejection Rubber 1 In.(25mm) From Scrap Cutting Rule
  • Improper Stripping Rubber And Location
    Replace Rubber Must “ROLL” Out The Scrap
  • Incomplete Cutting
    See Cutting
  • Nicks Holding To Blank
    Readjust Die To Eliminate Rule Joints. Redesign Blank To Eliminate Rule Joints.
  • Improper Blank Design
    Redesign Blank. Eliminate Square Corners & Parallel Sides In Feed Direction