產品介紹

淨漿機系列
【CY-X 淨漿機】-淨漿機-超耐企業有限公司

CY-X 淨漿機

淨漿機

產品說明
Performance description
Reverse cleaners are final resolution to the removal of light weighted dirts and debris in secondary paper treatment, CY X-clone is a through flow type cleaner,specifically designed to remove low specific gravity or floatable materials, such as wax, hot melt and adhesives, polystyrene foam, polyethylene, and some "stickie" adhesives,from low consistency paper fiber slurries.
CY X clone has two special features. 1. reject tube can be retracted during opening to allow a plug of stock, or a piece of oversized debris to be flushed out. 2. a ceramic insert has been permanently place in cleaner body annular opening where highest wear take place, The ceramic assures that dimension will be maintained for the full life of the plastic unit.

The cleaner may be oriented horizontally or vertically, wall mounted, or loose, as required. The cleaner should be installed in such a way that it is convenient to bucket time the accept and reject flow rates. hydraulic and pulp reject rates are critical parameter, which cannot be aaccurately determined without the ability to bucket time both the accept and reject flows.
功能說明
規格說明
Suggested operating conditions are:
Pressure drop(feed-accept) 10~20 psi
Feed flow rate 36 gpm (for 10 psi delta p)
Feed consistency 0.8~1.2 max, depending on furnish. No minimum.
Hydraulic reject rate 6~12% of the feed flow
Pulp reject rate 0.5~5%, depending on furnish and above variables.
瀏覽記錄
    3詢價清單